Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

A characterization of the Raman modes in a J-aggregate-forming dye: a comparison between theory and experiment

J-Aggregates are a class of organic molecules that possess several interesting characteristics that make them attractive for a range of organic-based optoelectronic devices. We present experimental and computer-simulation studies of the Raman-active vibrational modes in the J-aggregate-forming dye 5,6-dichloro-2-[[5,6-dichloro-1-ethyl-3-(4-sulfobutyl)benzimidazol-2-ylidene]propenyl]-1-ethyl-3-(4-sulfobutyl)benzimidazolium hydroxide, sodium salt, inner salt. The molecular monomer and dimer are analyzed computationally and the Raman mode energies extracted. There is a good agreement between the energies of the theoretical and experimental Raman modes. Experimentally, an enhancement is seen in the intensity of two low frequency modes upon aggregation of the dye. This is attributed to aggregation-enhanced Raman scattering. An enhancement is also observed in certain modes of the calculated spectra upon changing from a monomer to dimeric arrangement. A link is suggested between the Raman-active vibrational modes of the molecule, and a time-dependent electronic coupling present over several molecules.     

Temperature dependent polariton emission from strongly coupled organic semiconductor microcavities

We investigated the absorption and photoluminescence (PL) of J-aggregates of a cyanine dye both in a thin film format and when used as the active layer in a strongly-coupled microcavity. We show that as temperature is reduced, the absorption linewidth of the J-aggregates narrows and shifts to higher energy. When the J-aggregate is placed in a microcavity we find that the energy of the polariton modes also shifts to higher energies as temperature is reduced. We compare the intensity of PL emission from the upper and lower branches at resonance as a function of temperature, and find that it can be described by an activation energy of 25 meV. PL emission spectra at resonance also suggest that uncoupled excitons inside the microcavity populate the upper polariton branch states.     

Experimental evidence for exciton scaling effects in self-assembled molecular wires

Resonant Rayleigh scattering from self-assembled one-dimensional molecular J-aggregate wires reveals a distinct dependence of the exciton energy on the width of lateral extension. For the J aggregates used in this study, strong in-line dipole coupling leads to a delocalization of the exciton wave function over several molecular units. Polarization dependent measurements of resonantly scattered light from the wires show that the exciton dipole moment is oriented perpendicular to the long axis. The experimental observations can be described by applying a quantization condition to the center of mass motion of the J-band exciton in the wires.     

Fluorene‐Based Co‐polymer with High Hole Mobility and Device Performance in Bulk Heterojunction Organic Solar Cells

A new donor–acceptor polymer based on 9,9‐dioctylfluorene is synthesized and tested in organic photovoltaic devices. Results show that the polymer exhibits good solubility in a range of organic solvents and has a high hole mobility. When blended with a PC₇₀BM acceptor and fabricated into a bulk heterojunction, photovoltaic devices having a maximum power conversion efficiency (PCE) of 6.2% and a peak external quantum efficiency of 74% are created. Such efficiencies are realized without any necessity for solvent additives or thermal annealing protocols.

     

关于K个复相关矩阵相等的检验

§ 1.Ｉｎｔｒｏｄｕｃｔｉｏｎ　ＷｅａｒｅｇｉｖｅｎｋｉｎｄｅｐｅｎｄｅｎｔＷｉｓｈａｒｔｄｅｎｓｉｔｉｅｓｏｆｔｈｅ (ｐ +ｑ)× (ｐ +ｑ)ｒａｎｄｏｍｓｙｍｍｅｔｒｉｃｐｏｓｉｔｉｖｅｄｅｆｉｎｉｔｅｍａｔｒｉｃｅｓＧ1,… ,Ｇｋｔｏｂｅｇ(Ｇｉ) =Ｋｅｘｐ -12 ｔｒＲ- 1ｉ Ｇｉ Ｇｉ12 (ｎｉ- ｑ-ｐ- 1) ,(1 )ｗｈｅｒｅｉ=1 ,… ,ｋ,ａｎｄＲｉｄｅｎｏｔｅｓｔｈｅｐｏｐｕｌａｔｉｏｎｃｏｒｒｅｌａｔｉｏｎｍａｔｒｉｘｏｆｔｈｅｉ ｔｈｐｏｐｕｌａｔｉｏｎａｎｄＫａｓａｇｅｎｅｒｉｃｌｅｔｔｅｒｄｅｎｏｔｅ…     

Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

Narrow Energy Gap Polymers with Absorptions up to 1 200 nm and their Photovoltaic Properties

A series of donor/acceptor carbazole copolymers comprising alternating 6,7‐diphenyl‐4,9‐bis‐(thiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline and 3,6‐dimethyl‐9‐alkyl‐9H‐carbazole repeat units ( P1 ), or 3,6‐dimethyl‐9‐triarylamino‐9H‐carbazole repeat units ( P2 ), or 9‐triarylamino‐9H‐carbazole repeat units ( P3 ) has been prepared following Suzuki polymerization procedures. P3 absorbs light up to 1 200 nm and has an energy gap of 1.1 eV, while P1 and P2 have energy gaps of 1.3 and 1.25 eV, respectively. Photovoltaic cells with ITO/PEDOT:PSS/ P3 :PCBM (1:1 w/w)/Ca showed an open‐circuit voltage of 0.4 V under white light illumination, power conversion efficiency of 0.61%, and short‐circuit current of 5.2 mA · cm⁻².

     

Pyrene–benzothiadiazole‐based copolymers for application in photovoltaic devices

The preparation and characterization of four narrow band gap pyrene–benzothiadiazole‐based alternating copolymers are presented. An investigation of the impact of attaching different solubilizing groups to the pyrene repeat units on the optical, electrochemical, and thermal properties of the resulting materials was undertaken along with studies on the aggregation of polymer chains in the solid state. Unsurprisingly, polymers which had the smaller 2‐ethylhexyl chains attached to the pyrene units (PP_EH‐DTBT and PP_EH‐DTffBT) displayed lower molecular weights relative to polymers with larger 2‐hexyldecyl substituents (PP_HD‐DTBT and PP_HD‐DTffBT). Despite this, the 2‐ethylhexyl substituted polymers displayed narrower optical band gaps relative to their analogous 2‐hexyldecyl substituted polymers. Of all polymers synthesized, PP_EH‐DTBT displayed the lowest optical band gap (1.76 eV) in the series. All polymers display degradation temperatures in excess of 300°C. Polymers with smaller alkyl chains on the pyrene units display shallower highest occupied molecular orbital levels, which could be due to increased intramolecular charge transfer between the donor and acceptor units. Preliminary investigations on bulk heterojunction solar cells with a device structure indium tin oxide/poly(3,4‐ethylenedioxythiophene) : polystyrene sulfonate /Polymer : PC₇₀BM/Ca/Al were undertaken. Polymer/PC₇₀BM blend ratios of one third were used in these studies and have indicated that PP_EH‐DTBT displayed the highest efficiency with a power conversion efficiency of 1.86%. Copyright © 2016 John Wiley & Sons, Ltd.